Configuration MP.11-R Installation and Management
QoS (Quality of Service) Parameters (BSU Only)
136
Step 3: Configure QoS Classes
Finally, the DL-Management SFC and UL-Management SFCs created in Step 2 must be added to each QoS Class used
by the TMP.11 network. Additionally, within the QoS class, these SFC must have the three PIRs mentioned in Step 1
associated with them.
A. Add SFCs to QoS Class
1. Click Configure > QoS > QoS Class.
2. Click Details next to the first class you wish to modify.
3. Under the SF Details heading, click Add Table Entries.
4. Configure the following parameters:
• SF Table Reference Index: DL-Management
• PIR Table Reference Index: ARP
• PIR Priority: 63
• Entry Status: Enable
5. Click Add. The DL-Management SF will be added to the Qos Class SF Index Entry list at the bottom of the page.
6. Remaining on this page, configure the parameters for the other UL-Management SF:
• SF Table Reference Index: UL-Management
• PIR Table Reference Index: ARP
• PIR Priority: 63
• Entry Status: Enable
7. Click Add. The UL-Management SF will be added to the Qos Class SF Index Entry list at the bottom of the page.
8. Return to the QoS Class screen, and repeat steps 1- 7 for any other QoS classes used in the network.
B. Add PIRs to SFCs within the QoS Class
1. Click Configure > QoS > QoS Class.
2. Click Details next to the first class you wish to modify.
3. Under the SF Details heading, click Details next to the DL-Management SF.
4. Under the PIR Index Add heading, click Add Table Entries.
5. Add the DST Management (whether IP or MAC) PIR to this SF by configuring the following parameters:
• PIR Table Reference Index: Management Station DST MAC Addr or Management Station DST IP Addr
• PIR Priority: 63
• Entry Status: Enable
6. Click Add. The PIR will be added to the Qos Class SF-PIR list at the bottom of the page.
7. Remaining on this page, add the SRC Management PIR to this SF by configuring the following parameters:
• PIR Table Reference Index: Management Station SRC MAC Addr or Management Station SRC IP Addr
• PIR Priority: 63
•
Entry Status: Enable
8. Return to the QoS Class screen and repeat steps 2 - 6 for the UL-Management SF in this class.
9. Return to the QoS Class screen and repeat steps 1 - 8 for any other QoS Classes used in the network.
QoS Configuration via Radius Server
RADIUS QoS configuration is used for centralized management of QoS configuration for SU's. It provides the same QoS
configuration for SU throughout its roaming.
To Next Page
Loading...
Need help?
General
