EasyManuals Logo

Proxim Tsunami MP.11 2454-R User Manual

Default Icon
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Introduction MP.11-R Installation and Management
Management and Monitoring Capabilities
13
Up to 250 SUs can be connected to a BSU. If a BSU already has 250 SU, a new SU cannot be connected to the BSU. In
this figure, the system is designed as follows:
The central building B is equipped with a BSU, connected to either an omni-directional, or a wide angle antenna.
The two other buildings A and C are both equipped with an SU connected to a directional antenna.
Management and Monitoring Capabilities
There are several management and monitoring interfaces available to the network administrator to configure and
manage the unit:
Web Interface
Command Line Interface
SNMP Management
Web Interface
The Web interface (HTTP) provides easy access to configuration settings and network statistics from any computer on
the network. You can access the Web interface over your network, over the Internet, or with a crossover Ethernet cable
connected directly to your computer’s Ethernet port. See Logging in to the Web Interface.
Command Line Interface
The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and
parameters to configure and manage the unit. You enter command statements, composed of CLI commands and their
associated parameters. You can issue commands from the keyboard for real-time control or from scripts that automate
configuration. See the Tsunami MP.11/QB.11 Reference Manual for more information about the Command Line Interface.
SNMP Management
In addition to the Web interface and the CLI, you also can manage and configure your unit using the Simple Network
Management Protocol (SNMP). Note that this requires an SNMP manager program (sometimes called MIB browser) or a
Network Manager program using SNMP. NuDesign MIB Browser Pro 8.2 or iReasoning MIB browser can be usedfor
managing MP.11 devices. The units support several Management Information Base (MIB) files that describe the
parameters that can be viewed and configured using SNMP:
mib802.mib

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Proxim Tsunami MP.11 2454-R and is the answer not in the manual?

Proxim Tsunami MP.11 2454-R Specifications

General IconGeneral
BrandProxim
ModelTsunami MP.11 2454-R
CategoryWireless Router
LanguageEnglish

Related product manuals