Installation and Initialization MP.11-R Installation and Management
Hardware Installation
31
Step 11: Install Documentation and Software
To install the documentation and software on a computer or network:
1. Place the CD in a CD-ROM drive. The installer normally starts automatically. (If the installation program does not start
automatically, click setup.exe on the installation CD.)
2. Click the Install Software and Documentation button and follow the instructions displayed on the installer windows.
The following documentation and software products are installed:
– Available from Start > All Programs > Tsunami > MP.11 [Model Name]:
• Documentation (in Docs subdirectory):
– Installation and Management Guide
– Quick Installation Guide
– Reference Manual
– Safety and Regulatory Guide
– Recommended Antenna Guide
– Antenna Installation Guide
• Online Help
• Scan Tool (in Scan Tool subdirectory)
• TFTP Server (in TFTP Server subdirectory)
NOTE: All of these items are also available from C:\Program Files\Tsunami\MP.11 [Model Name].
– Available from C:\Program Files\Tsunami\MP.11 [Model Name]:
• Documentation (in Docs folder): See list above
• Help files (in Help folder; click on index.htm to access)
• TFTP Server and Scan Tool program (in Extras folder)
•MIBs (in MIBs folder)
To Next Page
Loading...
Need help?
General
