MP.11-R Installation and Management
56
5
System Status
This chapter describes viewing system status and event log information from the unit’s Web Interface.
Click Status to access system and event log information. See the following sections:
• Status
• Event Log
Help and Exit buttons also appear on each page of the Web interface; click Help to access online help; click Exit to exit
the application.
For an introduction to the basics of management, see Basic Management.
Status
The Status tab showing the system status is displayed automatically when you log into the Web Interface. It is also the
default window displayed when you click Status on the left side of the window.
The Status window shows the System Status and the System Traps.
System Status
This section shows the basic system status including the version number of the embedded software.