MP.11-R Installation and Management
15
2
Installation and Initialization
This chapter describes the steps required to install and mount the unit, and to align the antenna. An antenna cable is
required only when you use the external antenna option. Note that the unit must have either the integrated antenna or
must be connected to an external antenna for its operation. The installation procedure does not include the mounting
and connection of antennas. See the Tsunami MP.11 Antenna Installation Guide for this information.
If you are already familiar with this type of product, you can use the Quick Install Guide for streamlined installation
procedures.
See the following sections:
• Hardware Overview
• Product Package
• Hardware Installation
– Step 1: Choose a Location
– Step 2: Unpack Shipping Box
– Step 3: Assemble the Cable
– Step 4: Determine Proper Mounting Orientation
– Step 5: Assemble Mounting Hardware
– Step 6: Mount the Unit
– Step 7: Plug in the Cables
– Step 8: Power on the Unit
– Step 9: View LEDs
– Step 10: Align the Antenna
– Step 11: Install Documentation and Software
• Initialization
– ScanTool
– Setting the IP Address with ScanTool
• Logging in to the Web Interface
To Next Page
Loading...
Need help?
General
