page 16
Industrial Power Corruptor Manual Rev 1.00
terminal blocks that do not have conductors inserted. This will
prevent finger access to potentially high voltage terminal block
contacts.
The sag/swell events will be generated from phase-to-phase.
If you want phase-to-neutral events, connect your IPC for wye
installation (see next page). Do not use the earth conductor as a
neutral.
Three-phase voltage sags/swells and interruptions will cause
phase imbalance as well. Ensure that your equipment is protected
against or can tolerate phase imbalance.
absolute-emc.com
Phone:703-774-7505
info@absolute-emc.com
To Next Page
Loading...