page 46
Industrial Power Corruptor Manual Rev 1.00
3.5.7.5 Power flow recorder
The Power Flow Recorder is probably the most powerful and
useful feature of your IPC's Power Flow
Analysis option. You can
record all of the power flow parameters, in real time, to your
computer's disk. Then use the FlowScope software to graph and
display the results.
The Power Flow Recorder is designed with industrial
processes in mind. Dif
ferent steps in your process take different
amounts of power, and have different power characteristics. Start
by entering the names of up to 8 different steps.
When you start the Power Flow Recorder, it will record all of
the power parameters, once per second, in the disk file you
selected.
Along with the power parameters, it will record which
process state is active. So you should watch your process, and
click on each new process state as it begins. There's no problem
with going back and forth between steps - just click on the step
that is in process now.
The Power Flow Recorder will record kW, kVA, true PF, kWh,
Amps RMS,
Amps Peak, Crest Factor, Unbalance, THD, and TDD.
When your process concludes, stop the Power Flow Recorder.
Use the FlowScope software to graph the results, which can be
copied and pasted into your report.
absolute-emc.com
Phone:703-774-7505
info@absolute-emc.com
To Next Page
Loading...