page 18
Industrial Power Corruptor Manual Rev 1.00
If larger conductors are connected directly into the terminal
blocks, O-rings or similar protective insulating devices should
be used to ensure that it is impossible to touch bare conductors
or terminal block contacts.
The sag/swell events will be generated from phase-to-phase
and phase to neutral.
Three-phase voltage sags/swells and interruptions will cause
phase imbalance as well. Ensure that your equipment is protected
against or can tolerate phase imbalance.
absolute-emc.com
Phone:703-774-7505
info@absolute-emc.com
To Next Page
Loading...