page 2
Industrial Power Corruptor Manual Rev 1.00
WARNING: Death, serious injury, or fire hazard could result
from improper connection or operation of this instrument.
Carefully read and understand manual before connecting this
instrument.
AVERTISSEMENT: Si l'instrument est mal connecté, la mort,
des blessures graves, ou un danger d'incendie peuvent s'en
suivre. Lisez attentivement le manuel avant de connecter
l'instrument.
WARNUNG: Der falsche
Anschluß dieses Gerätes kann Tod,
schwere Verletzungen oder Feuer verursachen. Bevor Sie
dieses Instrument anschließen, müssen Sie die Anleitung lesen
und verstanden haben.
ADVERTENCIA: Una conexión incorrect
a de este instrumento
puede producir la muerte, lesiones graves y riesgo de incendio.
Lea y entienda el manual antes de conectar.
© 2005 Power Standards Lab. All rights reserved. No parts of this document may be copied, reproduced, or translated to
another language without the prior written consent of Power Standards Laboratory. “Industrial Power Corruptor” is a regis-
tered trademark of Power Standards Lab. “Windows” is a registered trademark of Microsoft.
The information contained in this document is subject to change without notice.
PSL MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT
LIMITED T
O, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
USE.
PSL shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Printed in the United States of America.
First Printing: June 2003
absolute-emc.com
Phone:703-774-7505
info@absolute-emc.com
To Next Page
Loading...