page 33
Industrial Power Corruptor Manual Rev 1.00
If your computer does not have a serial port, a USB-to-serial adaptor
may be used, but it must support on-the-fly changes in baud rate. Certain
USB-to-serial adaptor chip sets were manufactured in 2002 and 2003
with a bug that prevents these changes. If a USB-to-serial adaptor is
needed, we recommend Belkin USB Serial Adapter F5U103.
We recommend a fast Pentium 3, or higher, processor. If your
processor is too slow
, the IPC software will give you a warning message.
The optional Power Flow Analysis software requires more processing
power than the rest of the programs.
PSL can provide a free software tool for checking your serial ports.
Contact us at www
.PowerStandards.com .
absolute-emc.com
Phone:703-774-7505
info@absolute-emc.com
To Next Page
Loading...