Pulsar Measurement Ultra 3 - Page 49

PULSAR MEASUREMENT
49
Wait….
PARAMETER
DEFAULT
DESCRIPTION
P101 Transducer
2 = dB6
Type of transducer being used.
P102 Material
1 = Liquid
Material in the vessel, either liquid or
solid. If the solid lays flat, then it can be
programmed as liquid.
P104 Measurement
Units
1 = metres
Select units to be used for programming
measurement information.
P105 Empty Level
6m
Distance from the face of the transducer
to the material at the bottom of the
vessel.
P106 Span
5.7m
Distance from the empty level (0% full) to
span (100% full).
If you have selected a Volume Application, you will now be prompted
to enter details required for the calculation of volume
PARAMETER
DEFAULT
DESCRIPTION
P600 Vessel Shape
0 = Cylinder Flat
Base
Shape of vessel being monitored
P601–P603
Vessel Dimensions
Dependent on
vessel shape
selected
Enter vessel dimensions as required.
P605 Volume units
3 = Cubic
metres
Selects volume units required
P607 Max Volume
Read Only
Displays the calculated Volume in P605
units.
For More Options Hit Enter..