Pulsar 22 - Section 3 Getting Started; Quick Start

Pulsar Model 22 User Manual
Page 14
Section 3 Getting Started
Quick Start
There are different ways to use a dosemeter and Reader. The following simple
instructions should be followed to carry out personal sound exposure measurements
using a single MODEL 22 dosemeter and MODEL 22R Reader. Ensure that you have
read all of the instructions and information contained in this manual before operating
the equipment.
The basic operations are:
Function see page:
Ensure the dosemeter battery has been fully charged. 15
Wake the dosemeter if it has not been used for 1 hour or longer 22
Check configuration of dosemeter using the Reader menu 18
Push the dosemeter into the calibration cavity on the Reader. 23
Reset the dosemeter using the Reset key. 24
Calibrate the dosemeter using the Cal key. 25
Remove the dosemeter from the calibration cavity and attach it to the
wearer.
26
Start the session using the Run key or by using the Run key of the Keyfob
unit.
28
At the end of the shift, stop the session using the Stop key or use the Stop
key of the Keyfob unit.
29
Remove the dosemeter from the wearer and push into the calibration cavity
on the Reader.
30
Perform a second calibration check using the Cal key. 30
Transfer the dosemeter session data to the Reader using the Read key. 31
View the results 32
Download measurements to the software 32
Unpacking the instrument for the first time
Carefully remove all of the components of the dosemeter system from the shipping
container or carrying case and inspect it for possible damage or missing items. If there
appears to be damage or something is missing, contact Pulsar Instruments plc or your
local representative immediately.
Each MODEL 22 dosemeter is supplied with an SM1 Mounting Kit which contains the
following components:
Round Mounting Plate
Mounting Clip System
Certificate of Calibration
The MODEL 22R Reader Unit is supplied with the following accessories:
USB Cable
dosemeter Software CD
Operating Manual
Certificate of Calibration
Please check that any other components that you have ordered are included with your
equipment.