Pulsar IMP+ - Volume (UoL) Menu - Vessel Shape; P600 Vessel Shape Selection

IMP+ INSTRUCTION MANUAL
34
Volume (UoL) Menu
P600 Vessel Shape
This parameter determines which vessel shape is used when utilising
“Volume Conversion”.
The choices are as shown in the table below, along with the dimensions that
are required to be entered (P601-P603).
VESSEL SHAPE
P600 VALUE DESCRIPTION
DIMENSIONS
P600 = 0 (Default)
Cylindrical Flat Base
Cylinder diameter
P600 = 1 Rectangular Flat
Base
Width and Breadth
P600 = 2 Cylindrical Cone
Base
Cylinder diameter
and height of
bottom
P600 = 1 Rectangular Flat
Base
Width and Breadth