Technical Specifications 9.
Table 3: JDX Technical Specifications
Weight Approximately 348 g (0.77lbs)
Material inlet Female Luer
Operating fluid pressure 10-60 psi
Operating air pressure 35-65 psi
Viscosity range 1-400,000 Cps
Minimum shot size 10 nl
Maximum speed Up to 300 Hz continuous duty
Maximum heater temperature 70°C
Wetted parts
17-4 stainless steel, carbide, silicone or tygon, and
silicone, EPDM, Kalrez®,or Viton
Refill time >1.7 msec
Dwell time > 1.9 msec
Fluid syringe sizes 5, 10, 30 and 50 cc, also available for a reservoir setup
Heater ± 1°C from up to 70°C
To Next Page
Loading...
