Pyronix ENFORCER V11 - Page 47

47
ENFORCER V11 PROGRAMMING GUIDE
MENU OPTIONS CLEAN START 2020 CLEAN START 2000
User Areas ABCD ABCD
User Set Options Unset/Set [0] Unset/Set [0]
Flexi Set Yes [1] Yes [1]
User Name _ _
Change Engineer Code 1111 1111
VOLUME CONTROL
A, B, C, D Entry [4] [4]
A,C, D Exit [4] [4]
B Exit [1] [1]
App Exit [4] [4]
Alarm [5] [5]
Fire [5] [5]
Tamper [5] [5]
Day Alarm [5] [5]
Chime [3] [3]
Code Stops Sound Yes [1] Yes [1]
E/E Keypads Only No [0] No [0]
Alert Kps Only Yes [1] Yes [1]
Silent Tech Alert No [0] No [0]
Use Main Sounder Yes [1] Yes [1]
SYSTEM OPTIONS
Site Options
Set With Fault Yes [1] Yes [1]
Set With Tamper+ No [0] Yes [1]
Set with ATS Fault No [0] Yes [1]
Set Fail = Alarm Yes [1] Yes [1]
Do Bat Load Test No [0] No [0]
Strb/Sqwk At Set None [0] None [0]
Use Level Set Yes [1] Yes [1]
Autoset Force No [0] No [0]
Restrict PIN Use Yes [1] No [0]
Simple Set No [0] No [0]
Intelligent Set No [0] No [0]
Common Lobby Yes [1] Yes [1]
Flexi Unset No [0] No [0]
2 Key HU None [3] Both [2]
Tag Opens Doors No [0] No [0]