46
ENFORCER V11 PROGRAMMING GUIDE
MENU OPTIONS CLEAN START 2020 CLEAN START 2000
If programmed as Reader:
Reader Is: Set Point [0] Set Point [0]
If programmed as Reader, Entry
Control or Access Control Lock Open Time [005]
Door Open Time [010] Lock Open Time [005]
Door Open Time [010]
CHANGE TIMERS
A, B, C, D: Entry Time [030] [030]
A, B, C, D: Exit Time [020] [020]
A, B, C, D: App Exit Time [030] [030]
A, B, C, D: Siren Time [04] [04]
A, B, C, D: Siren Delay [00] [00]
Conrm Time [30] [30]
HU Conrm Time [08] [08]
Strobe Time [00] [00]
Re-Arm No [3] [3]
AC Signal Delay [040] [040]
Settle [005] [005]
Double Knock [10] [10]
Pre-Alarm [030] [000]
Wi-Fi Fault Delay [180] [180]
Comm Fault Delay [180] [020]
Set Fail [040] [120]
Fire Siren Time [04] [04]
Set Fail Warning [00] [00]
Occupancy [00] [00]
Occupancy Suspend [ABCD] [ABCD]
Input NAT Days [14] [14]
Input NAT Hours [00] [00]
Wireless Supervision Time [02] [24]
Wireless Jamming Time [30] [100]
Service Time [000] [000]
CODES AND USERS
5 Digit PINs No [0] No [0]
Change Duress Codes All codes empty All codes empty
Change Master Manager Code
Master Manager Code 2222 2222
To Next Page
Loading...
