56
ENFORCER V11 PROGRAMMING GUIDE
NO. TYPE ACTIVE RESTORE
0064 "Test ATS
For use with ATE
complying with BSIA
Form 175 to initiate
test call to ARC by each
available path."
Test signalling through PSTN and
GSM. Activates when a test call is
sent.
When test completed
0065 Input Activity Fault When a zone with the occupancy
attribute enabled has not been
triggered for the duration of the
occupancy timer.
When a valid user code/tag has
been entered/presented or when
the zone is triggered.
0066 ATE not used N/A N/A
0170-
0199
User Dened 1-30 Can be used to trigger outputs via the keyfob. For example, an output
can be programmed as type ‘[0171] User Dened 02’ and then wired
to a garage door. If a user keyfob button is programmed as ‘[0171] User
Dened 02,’ when that button is pressed, the output will trigger opening
the garage door.
0600-
0609
Timers 01-10 For future development
0610-
0619
Calendar 01-20 For future development
0620-
0639
Logic Gate 01-20 For future development
0640-
0649
Delay 01-10 For future development
1xxx Follow Input xxx When input is activated When input clears
To Next Page
Loading...
Need help?
General
