Matrix 424/832/832+ LCD Programming Manual
Page 40 RINS916-6
13.5 Test Dial Interval (Function 604)
Press .
The current interval is displayed.
Example shows 00 (use
the time set in Function
603 as an interval)
ENTER INTERVAL
00
Enter 2 digits for the new interval setting (00 –
99).
Example shows 12
(every 12 days at time
programmed in
Function 603)
ENTER INTERVAL
12
Press to accept the changes.
NOTE: When 00 is entered as the interval, the interval between test dials is the time set in
Function 603 (page 39). Therefore, if the time set in Function 603 is 00:30, there will be a
test dial every 30 minutes, every day. When a number between 01 and 99 is entered as the
interval, test dials will occur at the time set in Function 603, every XX days, where XX is the
interval programmed here.
13.6 Telephone Number 1 Allocation (Function 605)
Press .
00 indicates no
telephone number
allocated
ENTER TEL ALLOC
00
Enter 1 digit for the telephone number (1 – 9, 0
deletes current allocation).
NOTE: A leading zero is always shown.
Example shows
telephone number 3
allocated as the 1
st
telephone number
ENTER TEL ALLOC
03
Press to accept the changes.
NOTE: Default is 0 (no number allocated).
13.7 Telephone Number 2 Allocation (Function 606)
Press .
00 indicates no
telephone number
allocated
ENTER TEL ALLOC
00
Enter 1 digit for the telephone number (1 – 9, 0
deletes current allocation).
NOTE: A leading zero is always shown.
Example shows
telephone number 4
allocated as the 2
nd
telephone number
ENTER TEL ALLOC
04
Press to accept the changes.
NOTE: Default is 0 (no number allocated).
13.8 Telephone Number 3 Allocation (Function 607)
Press .
00 indicates no
telephone number
allocated
ENTER TEL ALLOC
00
Enter 1 digit for the telephone number (1 – 9, 0
deletes current allocation).
NOTE: A leading zero is always shown.
Press to accept the changes.
Example shows
telephone number 1
allocated as the 3
rd
telephone number
ENTER TEL ALLOC
01
NOTE: Default is 0 (no number allocated).
To Next Page
Loading...
Need help?
General
