Matrix 424/832/832+ LCD Programming Manual
RINS916-6 Page 19
6.2 User Code Attributes (Function 301)
Press .
ENTER USER No.
__
Enter the 2-digit user number (01 – 32).
Example shows User 01.
This display is quickly
followed by the next.
ENTER USER No.
01
The current user attributes are displayed.
Select any attribute by using the and
keys, or use the – keys to select that
option directly.
Press to toggle the option
ON
or
OFF
.
Press to accept the options.
There are 6 options
SYSTEM OPTIONS 1
OPTION 4 OFF
SYSTEM OPTIONS 1
OPTION 3 OFF
SYSTEM OPTIONS 1
OPTION 2 OFF
CODE ALLOCATION
OPTION 1 ON
№ OPTION OFF OPTION ON
1 Disallow Omit (Bypass) Zones Allow Omit (Bypass) Zones
2 Normal User Code Duress Code Only
3 Duress Code Disabled Duress Code Enabled
4 Disallow Arm Allow Arm
5 Disallow Disarm Allow Disarm
6 Disallow Forced Re-arm Allow Forced Re-arm
7 Reserved For Future Use.
8 Limited User Code (default for Users 02 – 32) Master User Code (default for User 01)
Shaded = Default
6.3 Temporary Code (Function 302)
Press .
ENTER USER No.
__
Enter the 2-digit user number (01 – 32).
Example shows User 01.
This display is quickly
followed by the next.
ENTER USER No.
01
The maximum uses for this code is displayed.
Example shows 10 uses.
CODE LIMITS
10
Enter the new maximum use value as a 2-digit
number (00 – 99).
Press to accept the changes.
Example shows 4 uses
CODE LIMITS
04
VALUE DESCRIPTION
00 Unlimited uses of this code
01 After 1 use the code is deleted
02-99 Number of times this code can be used between any use of an unlimited code
To Next Page
Loading...
Need help?
General
