Matrix 424/832/832+ LCD Programming Manual
Page 8 RINS916-6
2. ACCESSING USER FUNCTIONS
Whilst in Engineer Mode all master user options, apart from changing user codes, are accessible by
prefixing the user option number by :
Function Number Master User Options
– Arm with omits (bypass)
– View event log
– Change keypad sounder volume*
– Change keypad brightness*
– View date and time
– Change reader sounder volume*
– Change system time
– Change system date
– Pulse PGM
– Open 1hr download window
– Proximity card allocating
– Add Key fobs
*NOTE: These functions terminate by exiting Engineer mode.
Engineer Mode allows you to arm and disarm the panel if the first three digits of the engineer code do
not coincide with the numbers of programming functions and engineer commands, and also if the first
digit is not equal to 0. For instance, if the engineer code is 9999, by entering in Engineer Mode you can
access the arm/disarm commands and reset the alarm panel in the same way as with a Master User
Code allocated in all partitions.
To Next Page
Loading...
