3
If you were able to connect to your DVR using our new Scan N’ View
service (available on some models), most of the work has been done for
you. You will only need to consult this manual if you wish to set up an
alternative connection method (See “Alternate Connections”, below and
Chapter 1), want to change your email settings (Chapter 3), or for full
instructions on using the QT View mobile app (Chapter 4).
If your system does is not capable of connecting via the Scan N’ View service, please follow
the instructions on the Networking Poster or in the following chapters.
This manual was accurate at the time it was completed. However, because of our ongoing
effort to constantly improve our products, along with smartphone and router manufacturers
adding and changing features on their products, it is possible that some functions may
change from how they are described. We encourage you to visit our website at www.Q-see.
com to check for the latest firmware and sofware updates as well as product announcements.
Throughout the manual we have highlighted warnings and other important information that will
assist you in operating your new system in a safe and trouble-free manner. Please take the
time to read and follow all instructions and pay attention to alerts as shown below:
NOTE! Text in blue boxes with the Information icon offer additional guidance
and explanations about how to make the most out of your system.
IMPORTANT! Red boxes with this icon indicate warnings. To prevent
possible injury or damage to the product, read all warnings before use.
ABOUT THIS MANUAL
Rev. 3.4 12/30/2013
ALTERNATE CONNECTIONS
In addition to using Scan N’ View, users can also choose to use one the traditional
connection methods found in Chapter 1 as well. These methods will be needed to log onto
their DVR remotely by using the Web Client (Chapter 2) . Additionally, if you plan on using
the included CMS software to monitor and control multiple QT-series devices, you will need an
Internet IP address for each machine.
To Next Page
Loading...
Need help?
General
