32
SEARCH
Clicking on the Search tab in the Remote Live Viewer will allow you to search by Time,
Event or File Management.
Time Search
STEP 1. The user can select the display mode as well as the time and date to begin
searching from in the area at the top of the Search window (Red box listed as
Item 1 in Picture 2-31)
PICTURE 2-31
STEP 2. After running the search, available events will be displayed in the Data
Information section.
STEP 3. A highlighted date in the Calendar (Item 2 in Picture 2-31) indicates that
data was recorded on that date.
STEP 4. Select which channels’ data to display (Item 3 in Picture 2-31)
STEP 5. Select an event from the Data Information list and click on the Play button to
begin playback.
To Next Page
Loading...
