QCT QuantaMesh User Manual

Network Switch lnstallation Guide 15
QuantaMesh T1000 Series
Data Port Connection
Supported Cables and Transceivers
See the following table for the list of supported cables and transceivers.
• 1000BASE-T: Cat 5e and Cat 6A (100m/330ft)
• DAC cable (SFP & SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m
• AOC cable (SFP & SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
• GE optic (SFP, LC, 850nm, MMF): GE BASE-SR optic
• GE optic (SFP, LC, 1310nm, SMF): GE BASE-LR optic
• 10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
• 10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
NOTE:
• Formoreinformationaboutthecable/transceiver,pleasecontactQCTsales.
Base-T Port Connection
The switch has 48 triple speed (10/100/1000) Base-T ports.
The Base-T ports are numbered and have corresponding Base-T port LEDs.
To connect to the Base-T port, do the following:
1 Connect one end of an Ethernet cable to the Base-T port.
37
38
47
48
45
46
43
44
41
42
39
40
2 Connect the other end of the Ethernet cable to a network.
The Base-T port LED (Link/Activity LED) lights green when the network link is established.

QCT QuantaMesh Specifications

General

Brand	QCT
Model	QuantaMesh
Category	Switch
Language	English