Network Switch lnstallation Guide 57
Appendix
Manually Install Vendor OS
With QUANTA ONIE code, it allows user to manually download an installer. You can use the
Download Installer function which supports 3 types of dierent protocols (i.e. FTP, TFTP, and
HTTP) to download the installer le from your local server.
To download and update the vendor OS code manually, perform the following:
1 Locate the specic QUANTA ONIE installer image that you want to download.
For example, the installer le name: ly3-onie-installer-1.5.3
2 Place the installer le into your local FTP, TFTP, or HTTP server.
For example, the server IP address: 192.168.2.153
3 Go to ONIE Linux Shell.
a. Connect your PC and the switch using a console cable.
b. Enter ONIE Linux Shell.
c. Use the following command to stop ONIE service discovery:
“killall discover”
d. Use the following command to set your switch box IP address:
“ifcong eth0 192.168.2.1”.
• ifcongeth0: the command string
• 192.168.2.1: the switch IP address
To Next Page
Loading...