Qualigen FastPack IP System - Page 60

50 65000159 Rev. 008 (06/17)
FastPack
®
IP System Procedure
Running Patient Samples - Continued
Action
Instrument
Information
Illustration
Open the FastPack
®
IP
analyzer door.
Place FastPack
®
IP on the
door. Align the pins on the
door with the holes in the
FastPack
®
IP.
It is only possible to align
the FastPack
®
IP in one
direction.
Close the analyzer door.
If the door is not closed,
the analyzer will not run.
Press the BLUE button.
“Ready”
The door will lock, and the
analyzer will run the test.
All the test information is
read by the analyzer from
the bar code on the
FastPack
®
IP label.
Refer to the
Troubleshooting section if
an error message is
displayed