Qualigen FastPack IP System - Page 61

65000159 Rev. 008 (06/17) 51
FastPack
®
IP System Procedure
Action
Instrument
Information
Illustration
“Processing
XX min. remain”
The screen will display test
status and time remaining.
Press the Cancel button if
test needs to be stopped in
an emergency.
When test is complete,
analyzer will beep.
The analyzer will provide
the test result on the
display.
Example:
“2.1 ng/mL
05/25/08 1:00PM”
or
“2.1 ng/mL
25/05/08 13:00”
The result will remain
displayed for one minute
after the door is opened or
until another test is run.
When a new test is run,
the previous test result is
erased from the analyzer
memory and display.
Open the analyzer door.
“Insert FastPack
in Printer”
The analyzer will start
beeping and display “Insert
FastPack
®
in Printer” until
result is printed.