r
aCk
I
nsTallaTIon
s
ysTem
I
nsTallIng The
r
aIls
4. Locate the position to install the right rail. Then install the 6 mounting pins onto the
designated holes on the rack.
Note:
Make sure both left and right rails are parallel.
5. Align the right rail with the installed 6 mounting pins. Then slide the rail backwards
until it locks into place.
6. Secure the front side of the right rail with screw.
Mounting Pin
Figure 2-2: Installing the Right Rail
7. Once the rails are installed properly, push and hold both retainers inwards, and
then slide the server all the way into the rack cabinet until it is fully seated and
locks into place.
Retainer
Figure 2-3: Installing the Server in the Rack
2-3
To Next Page
Loading...