Communication Protocol CubiScan 125 Command Set
CubiScan 125 Service Manual 73
Values
This command causes the CubiScan 125 to report all of its internal parameters. This is useful for
troubleshooting.
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
21Values Command Alpha (V) 56h
3 1 End of Text Control (ETX) 03h
4 1 Carriage Return Control (CR) 0Dh
5 1 Line Feed Control (LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
21Values Command Alpha (V) 56h
3 1 Acknowledge Alpha (A) 41h
4 4 Length DBW Numeric 00.0-99.9
8 1 Comma Alpha (,) 2Ch
94Width DBW Numeric00.0-99.9
13 1 Comma Alpha (,) 2Ch
14 4 Height DBW Numeric 00.0-99.9
18 1 Comma Alpha (,) 2Ch
19 4 Length CPI Numeric 0000-9999
23 1 Comma Alpha (,) 2Ch
24 4 Width CPI Numeric 0000-9999
28 1 Comma Alpha (,) 2Ch
29 4 Height CPI Numeric 0000-9999
33 1 Comma Alpha (,) 2Ch
34 4 Length Blanking Numeric 0.00-9.99
38 1 Comma Alpha (,) 2Ch
39 4 Width Blanking Numeric 0.00-9.99
43 1 Comma Alpha (,) 2Ch
44 4 Height Blanking Numeric 0.00-9.99
48 1 Comma Alpha (,) 2Ch
49 4 Length Gain Numeric 00.0-99.9
53 1 Comma Alpha (,) 2Ch
54 4 Width Gain Numeric 00.0-99.9
58 1 Comma Alpha (,) 2Ch
59 4 Height Gain Numeric 00.0-99.9
To Next Page
Loading...
