Communication Protocol CubiScan 125 Command Set
CubiScan 125 Service Manual 72
Units
This command causes the CubiScan 125 to report its current modes of operation.
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Values Command Alpha (U) 55h
31End of Text Control(ETX) 03h
4 1 Carriage Return Control (CR) 0Dh
51Line Feed Control(LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Units Command Alpha (U) 55h
3 1 Acknowledge Alpha (A) 41h
4 1 Dimension Units Alpha (E/M) 45h or 4Dh
5 1 Weight Units Alpha (E/M 45h or 4Dh
6 1 Factor Units Alpha (D/I) 44h or 49h
7 4 Dimensional Factor Numeric 0000-9999
11 6 Location Id./City Code Alpha
000000-ZZZZZ
Z
17 1 End of Text Control (ETX) 03h
18 1 Carriage Return Control (CR) 0Dh
19 1 Line Feed Control (LF) 0Ah
Negative Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Units Command Alpha (U) 55h
31Neg. Acknowledge Alpha (N) 4Eh
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
To Next Page
Loading...
