Quasar CP-3211 User Manual

Quasar CP-3211/CP-4221 User and Installation Guide
48
o Expand PTZ Control Panel
Use the PTZ control panel to quickly and easily control iris, angle, tilt, and zoom
settings for the Live View pane, and to run Presets, Pattern lines, and Sequence paths.
Click this button to expand the PTZ control panel:
 The PT Speed setting controls the rate at which the pan and tilt changes. Set a
number between 1 and 10 as the PT Speed every time users pan or tilt the camera
via the Pan & Tilt Direction Control Panel.
 To stop running a Pattern or Sequence path, move the cursor to the Live View pane
and move the camera in any direction.
 Select a Preset/Pattern/Sequence line and start it by clicking the Run button
See PTZ Settings for detailed information about these functions.
o Live View Pane Pan/Tilt Control
Control pan/tilt by left-clicking the cursor in the Live View pane and dragging the
pointer in any direction. Placing the pointer close to the center of the image results in
a slow rate of change. Placing the pointer further from the center results in a more
rapid rate of change.

Quasar CP-3211 Specifications

General

Brand	Quasar
Model	CP-3211
Category	Security Camera
Language	English