Configuration and Operation
47
o Recording
Pressing the Recording button stores recordings from the Live View in the location
specified on the local hard drive, which can be configured in the File Location screen.
The default storage location for the web recording is: C:/. Refer to File Location for
details.
o Zoom Adjustment
Click the Wide/Tele buttons to control zoom out/in, or move the zoom adjustment
bar to the desired zoom ratio.
Table 8: Home Page Function Buttons – No.2
Following is an explanation of the function button listed above:
o Optical/Digital Zoom Control
In Normal View display mode, you can zoom in/out by moving the cursor to the Live
Video pane and scrolling the mouse wheel. Digital zoom is only available when the
function is activated and set up on the Camera-Misc1 screen under the PTZ tab. See
the Camera—Miscellaneous Settings Menu 1 section for details. When the camera
reaches the limit of its optical range, it automatically switches to digital zoom.
o Focus Adjustment
• Auto Focus (Continuous AF) – Click the auto button to enable AF mode. In this
mode, the camera automatically and continuously maintains focus regardless of
zoom or view changes. The Focus status is displayed above the Live View pane.
• Manual Focus – Click the manual button to adjust focus manually using the
Near/Far buttons. The focus status is displayed above the Live View pane.
Table 9: Home Page Function Buttons – No.3
To Next Page
Loading...
Need help?
General