Radiodetection PCMx User Manual

© 2021 Radiodetection Ltd 18
Note: If you do not want to send out the survey
measurement to another device you can navigate
through the PCMx menu and switch Bluetooth to
‘OFF’.
4.16 Uploading PCMx Datalogs
Note: To upload PCMx saved results, Radiodetection’s
PCM Manager is required on the target PC. PCM
Manager is a free Windows® Software application
available for download at:
https://www.radiodetection.com/en-
gb/resources/software-downloads/pcm-manager
The PCMx provides the user with the opportunity to send
data from the locator to a PC by uploading the entire log
via a USB cable. Refer to section 8.8 for details.
4.17 Erasing All Stored Datalogs
Once erased the logs cannot be retrieved.
The erase function can be used to completely erase all
stored logs within the PCMx. To erase all stored logs
carry out the following:
 Quick-press the On/Off key to enter the
PCMx menu.
 Scroll through the menu options until DATA
is displayed.
 Enter DATA menu, scroll to DEL, enter DEL
and select Yes or No. Press ‘f’ key to
confirm.
4.18 Review Mode
Saved data within the PCMx can be reviewed. To review
stored logs carry out the following:
 Quick-press the On/Off key to enter the menu and
scroll through the menu options using the
Up/Down keys until VIEW is displayed.
 Quick-press the On/Off key and the last stored
log will be displayed.
 To scroll through the stored logs press the
Up/Down key.
 To exit VIEW mode press the ‘f’ key twice.
4.19 Overwriting saved logs
Previously saved logs can be overwritten. To overwrite
saved logs carry out the following:
 Quick-press the On/Off key to enter the menu.
 Scroll through the menu using the Up/Down
keys until View is displayed.
 Press the Antenna key and the last saved log will
be displayed.
 Scroll through the saved logs using the Up/Down
key. Once a particular log has been selected
press the Antenna key and the locator will revert
to the main screen.
Note: When a measurement is taken, the log number
selected to be overwritten will be displayed on the
screen. Accepting the measurement will overwrite
the selected log. If the measurement is rejected
the next measurement taken will be stored at the
end of the log file and not the log that was viewed
before. Each time a log is required to be
overwritten the log must be selected using the
procedure above.

Radiodetection PCMx Specifications

General

Brand	Radiodetection
Model	PCMx
Category	Measuring Instruments
Language	English