PCMx Operation Manual
© 2021 Radiodetection Ltd 37
Maintenance
9.1 General Maintenance
The PCMx locator and transmitters are robust, durable
and weatherproof. However, you can extend your
equipment’s life by following these care and maintenance
guidelines.
General
Store the equipment in a clean and dry environment.
Ensure all terminals and connection sockets are clean,
free of debris and corrosion and are undamaged.
Do not use this equipment when damaged or faulty.
Batteries and power supply
Use good quality Alkaline or NiMH batteries only.
When using an AC adapter, use only Radiodetection
approved adapters.
Only use Radiodetection approved Li-Ion battery packs.
Cleaning
WARNING! Do not attempt to clean this equipment
when it is powered or connected to any power
source, including batteries, adapters and live
cables.
Ensure the equipment is clean and dry
whenever possible.
Clean with a soft, moistened cloth.
If using this equipment in foul water systems or other
areas where biological hazards may be present, use an
appropriate disinfectant.
Do not use abrasive materials or chemicals as they may
damage the casing, including the reflective labels.
Do not use high pressure hoses.
Disassembly
Do not attempt to disassemble this equipment under any
circumstances. The locator and transmitter contain no
user serviceable parts.
Disassembly may damage the equipment and or reduce
its performance and may void the manufacturer’s
warranty.
Service and maintenance
The locator and transmitter are designed to minimize the
requirement for regular calibration. However, as with all
safety equipment, it is recommended (and may be
required by law) that they are serviced at least once a
year, either at Radiodetection or a Radiodetection-
approved repair center.
NOTE: Service by non-approved service centers or
operators may void the manufacturer’s warranty.
Radiodetection products, including this guide, are under
continuous development and are subject to change
without notice. Go to www.radiodetection.com or contact
your local Radiodetection representative for the latest
information regarding the PCMx locator and PCM
transmitters or any Radiodetection product.
9.2 Transportation
Maintain a temperature range within specifications when
transporting the unit. Transportation damage can occur
from improper handling. The following steps are
recommended to minimize the possibility of damage:
Pack the unit in its original packing material when
shipping.
Avoid high humidity or large temperature
fluctuations.
Keep the unit out of direct sunlight.
Avoid unnecessary shocks and vibrations.
9.3 Software Updates
From time to time, Radiodetection may release software
upgrades to enhance features and improve performance
of the PCMx locator.
Software upgrades are free of charge.
You can check if your products are up-to-date or upgrade
them by using the PCM Manager software upgrade
screen.
Refer to the PCM Manager operation manual for further
information.
To Next Page
Loading...
Need help?
General
