Raisecom ISCOM2600 (B) Series

To Next Page

To Previous Page

Raisecom

ISCOM2600 (B) Series Product Description

1 Overview

Raisecom Proprietary and Confidential

Model

Description

ISCOM2600-

28X-PWH-

AC_DC



Provide twenty-four 10/100/1000 Mbit/s RJ45 downlink optical

interfaces.



Provide four 10 Gbit/s SFP+ uplink interfaces (also supporting 1000

Mbit/s SFP).



Provide 1 SNMP interface for out-of-band network management.



Provide 1 RJ45 Console interface.



Provide 1 USB interface.



Support the 220 VDC power supply and -48 VDC power supply.



The twenty-four downlink interfaces support PoE and can supply

power to remote PDs. Downlink electrical interfaces 1–8 support

IEEE802.3af, IEEE802.3at, and IEEE802.3bt. Downlink electrical

interfaces 9–24 support IEEE802.3af and IEEE802.3at.

Main Page

Table of Contents5
Overview12
Introduction12
Features13
Table 1-1 Features13
Applications14
Enterprise Park Network Access14
Housing Estate Broadband Access15
Figure 1-1 Enterprise Park Network Access Networking15
Ordering Information16
Naming Convention16
Figure 1-2 Housing Estate Broadband Access16
Figure 1-3 Naming Convention17
Table 1-2 Naming Convention17
Ordering Information about Device18
Table 1-3 Ordering Information about Device18
System Structure23
Panels23
Iscom2600-28X23
Figure 2-1 Front Panel of the ISCOM2600-28X-AC23
Iscom2600-28G24
Figure 2-2 Rear Panel of the ISCOM2600-28X-AC24
Figure 2-3 Front Panel of the ISCOM2600-28X-DC24
Figure 2-4 Rear Panel of the ISCOM2600-28X-DC24
Figure 2-5 Front Panel of the ISCOM2600-28G-AC25
Figure 2-6 Rear Panel of the ISCOM2600-28G-AC25
Figure 2-7 Front Panel of the ISCOM2600-28G-DC25
Iscom2600-12X26
Figure 2-8 Rear Panel of the ISCOM2600-28G-DC26
Figure 2-9 Front Panel of the ISCOM2600-12X-AC26
Figure 2-10 Rear Panel of the ISCOM2600-12X-AC26
Iscom2600-12G27
Figure 2-11 Front Panel of the ISCOM2600-12X-DC27
Figure 2-12 Rear Panel of the ISCOM2600-12X-DC27
Figure 2-13 Front Panel of the ISCOM2600-12G-AC28
Figure 2-14 Rear Panel of the ISCOM2600-12G-AC28
Figure 2-15 Front Panel of the ISCOM2600-12G-DC28
Iscom2600-28X-24F29
Figure 2-16 Rear Panel of the ISCOM2600-12G-DC29
Figure 2-17 Front Panel of the ISCOM2600-28X-24F-AC/D29
Figure 2-18 Rear Panel of the ISCOM2600-28X-24F-AC/D29
Figure 2-19 Front Panel of the ISCOM2600-28X-24F-DC/D30
Figure 2-20 Rear Panel of the ISCOM2600-28X-24F-DC/D30
Figure 2-21 Front Panel of the ISCOM2600-28X-24F-AC/S31
Figure 2-22 Rear Panel of the ISCOM2600-28X-24F-AC/S31
Figure 2-23 Front Panel of the ISCOM2600-28X-24F-DC/S31
Figure 2-24 Rear Panel of the ISCOM2600-28X-24F-DC/S32
Figure 2-25 Front Panel of the ISCOM2600-28X-24F-AC_DC32
Figure 2-26 Rear Panel of the ISCOM2600-28X-24F-AC_DC32
Iscom2600-28X-Pwr/Iscom2600-28X-Pwh33
Figure 2-27 Front Panel of the ISCOM2600-28X-PWR/PWH-AC/D33
Figure 2-28 Rear Panel of the ISCOM2600-28X-PWR/PWH-AC/D33
Figure 2-29 Front Panel of the ISCOM2600-28X-PWR/PWH-DC/D34
Figure 2-30 Rear Panel of the ISCOM2600-28X-PWR/PWH-DC/D34
Figure 2-31 Front Panel of the ISCOM2600-28X-PWR/PWH-AC/S34
Figure 2-32 Rear Panel of the ISCOM2600-28X-PWR/PWH-AC/S35
Figure 2-33 Front Panel of the ISCOM2600-28X-PWR/PWH-AC_DC35
Interfaces36
Service Interfaces36
Figure 2-34 Rear Panel of the ISCOM2600-28X-PWR/PWH-AC_DC36
Table 2-1 Service Interfaces36
Table 2-2 Parameters of the 10 Gbit/S SFP+ Optical Interface38
Table 2-3 Parameters of the 1000 Mbit/S SFP Optical Interface38
Management Interfaces39
Table 2-4 Parameters of the 10/100/1000 Mbit/S Ethernet Electrical Interface39
Table 2-5 Management Interfaces39
Table 2-6 Parameters of the RJ45 Console Interface39
Leds40
Table 2-7 Parameters of the SNMP Interface40
Table 2-8 Leds40
Button41
Figure 2-35 Mode Button on the Panel41
Power Interfaces42
DC Power Interface42
Figure 2-36 DC Power Interface42
Table 2-9 Mode Button42
AC Power Interface43
Figure 2-37 AC Power Interface43
Table 2-10 DC Power Interface43
Table 2-11 Parameters of DC Power Interface43
Table 2-12 Parameters of AC Power Interface43
Cables44
Fiber44
Table 2-13 Fiber Connectors44
Ethernet Cable45
Figure 2-38 LC/PC Fiber Connector45
Table 2-14 Wiring of Fiber45
Figure 2-39 Ethernet Cable46
Table 2-15 Wiring of EIA/TIA 568A and EIA/TIA 568B Standards46
Figure 2-40 Wiring of 10/100/1000 Mbit/S Straight-Through Cable47
Figure 2-41 Wiring of the 100 Mbit/S Crossover Cable47
Ground Cable48
Figure 2-42 Wiring of the 1000 Mbit/S Crossover Cable48
Table 2-16 Technical Specifications of the Ethernet Cable48
Figure 2-43 Ground Cable49
Figure 2-44 OT Terminal49
Table 2-17 Technical Specifications of the Ground Cable49
DC Power Cable50
Figure 2-45 DC Power Cable50
Table 2-18 Technical Specifications of the DC Power Cable50
AC Power Cable51
Figure 2-46 European AC Power Cable51
Figure 2-47 American AC Power Cable51
Table 2-19 AC Power Cables51
Table 2-20 Technical Specifications of the European AC Power Cable51
RJ45 Console Cable52
Table 2-21 Technical Specifications of the American AC Power Cable52
Figure 2-48 RJ45 Console Cable53
Table 2-22 Wiring of the RJ45 Console Interface53
SFP Modules54
100 Mbit/S SFP Optical Module54
Figure 2-49 Wiring between the DB9 Female Connector and RJ45 Console Interface54
Table 2-23 Technical Specifications of the RJ45 Console Cable54
100 Mbit/S SFP Electrical Module55
1000 Mbit/S SFP Optical Module55
Table 2-24 Parameters of 100 Mbit/S SFP Optical Modules55
Table 2-25 Parameters of 100 Mbit/S SFP Electrical Modules55
Table 2-26 Parameters of 1000 Mbit/S SFP Optical Modules55
1000 Mbit/S SFP Electrical Module56
Gbit/S SFP+ Optical Module56
Table 2-27 Parameters of 1000 Mbit/S SFP Electrical Modules56
Table 2-28 Parameters of 10 Gbit/S SFP+ Optical Modules56
Technical Specifications57
Overall Parameters57
Table 3-1 Overall Parameters of the ISCOM2600 Series Switch57
Compliant Protocols and Standards59
Laser Safety Class60
Reliability Specifications61
EMC Specifications61
Safety Standards61
Table 3-2 Reliability Specifications61
Environmental Requirements62
Storage Environment62
Table 3-3 Atmosphere Requirements During Storage62
Transport Environment63
Operation Environment63
Table 3-4 Atmosphere Requirements During Transport63
Table 3-5 Atmosphere Requirements During Operation63
Device Installation65
Installing Hardware65
Preparing for Installation65
Table 4-1 Requirements on Operation Environment65
Table 4-2 Power Supply Requirements on Operation66
Installing Device67
Figure 4-1 Installing Brackets67
Figure 4-2 Installing Cage Nuts68
Figure 4-3 Installing Guide Rails68
Connecting Cables69
Figure 4-4 Installing the Device Horizontally in the Rack69
Figure 4-5 Inserting the SFP Optical Module69
Figure 4-6 Connecting the Fiber70
Figure 4-7 Connecting the Ethernet Cable70
Figure 4-8 Connecting the Ground Cable71
Figure 4-9 Connecting the AC Power Cable71
Installing Software72
Figure 4-10 Connecting the DC Power Cable72
Figure 4-11 Connecting the RJ45 Console Cable72
Appendix73
Terms73
Acronyms and Abbreviations76

Raisecom ISCOM2600 (B) Series - Page 22

Table of Contents

Related product manuals