External Automatic Filters R&S XU 4200
3.79 6166.5368.02.01
3.7 External Automatic Filters
Motor Tuned Tel sa Filter \Motor tune d telsa fil ter "Radio".do c
3.7.1 Telsa External Automatic Filter
This chapter
This chapter provides information about cabling and configuration using the
Telsa external automatic filter together with the radio.
3.7.1.1 Introduction/Overview
Introduction
The radio supports several Telsa Automatic Cavity Filters with single and
double cavity.
The Telsa external automatic filter is optional hardware equipment and it is
not contained in a standard shipment.
3.7.1.2 Cabling
Instructions
1. Connect the filter to the RS-485 interface of the radio. In case of the
transceiver R&S XU 4200 the filter must be always connected to the TX
module via X7.
Fig. 3.77 Telsa external automatic filter connection.
To Next Page
Loading...