R&S XU 4200 Unpacking and Checking
6166.5368.02.01 2.2
2.2 Unpacking and Checking
Recommended
procedure
After delivery carry out the following steps:
1. Unpack the transceiver.
2. Check if delivery (transceiver and accessories) is complete by referring
to the delivery note (see Accessories in the Appendix).
3. Check the transceiver and accessories for signs of damage which may
have occurred during transit.
4. Contact the shipping agent immediately if damage is found.
5. Keep the packaging (box, etc.) for later use, e.g. if the transceiver is to
be sent to the nearest Rohde & Schwarz representative for repair (see
the List of Rohde & Schwarz Offices following the title page of this
manual).
0.
To Next Page
Loading...