Specifications R&S XU 4200
6.1 6166.5368.02.01
6 Technical Information
This chapter
This chapter contains a description of the transceiver interfaces.
Further
information
Chapter 3.1 contains an overview of transcei
ver control element
s,
indicators, etc.
Chapter 3 describes how to put the radio into operation.
6.1 Specifications
Note: The series R&S 4200 radios have been developed and designed to
allow a service life of 10 years and more when used in normal conditions.
For details see Specifications in the Appendix.
6.2 Interface Description
Note: Signal names with a leading "/" are low-active (e.g. /TEST_OC).
6.2.1 AC Input X1
Power entry module
Fig. 6.1 AC input X1.
Entry in column D (direction): O = Output I = Input B = Bi-directional
Entry in column T (type): A = Analog D = Digital P = Power
Signal description D T Range Contact Remarks
L I P X1.L Main power – phase
N I P
115 V/230 V AC
–10/+15 %
47 to 63 Hz
max. 400 W
X1.N Main power – neutral
E I P Safety ground X1.E Safety ground
N
E
X
L
To Next Page
Loading...