R&S FSV3030 User Manual

Data Management
R&S
®
FSVA3000/ R&S
®
FSV3000
552User Manual 1178.8520.02 ─ 01
Destination
Defines the medium to which the printout is output.
"File"
Stores the printout to a file in the selected format. The filename is
queried at the time of storage, or a default name is used (see Sup-
press File Name Dialog ).
Multiple windows can only be printed to a file in PDF format. If you
select an image file format, the content setting is automatically set to
Print Screenshot . Page settings are not available for image files;
however, you can configure the colors used for the screenshot (see
Chapter 11.5.1.5, "Print Color Settings", on page 554).
"Clipboard"
Copies the printout to the clipboard. Since only single pages can be
copied, only screenshots can be copied to this destination, not multi-
ple windows (see Chapter 11.5.1.1, "Print Content Settings",
on page 545). Page settings are not available; however, you can con-
figure the colors used for the screenshot (see Chapter 11.5.1.5, "Print
Color Settings", on page 554).
If you select the clipboard as the printing destination, the content set-
ting is automatically set to Print Screenshot .
"Printer"
Sends the printout to the printer selected from the Printer Name list.
Remote command:
HCOPy:DESTination<device> on page 1077
HCOPy:DEVice:LANGuage<device> on page 1078
Suppress File Name Dialog
If the Destination is a file, the file selection dialog box is not displayed. Instead, the
default storage location and filename are used.
(C:\R_S\INSTR\USER\FSV3000_ScreenShot_<date and time>).
Printer Name
Defines the printer to print to if a printer is selected as the Destination .
Any printers detected in the network are listed for selection.
Tip: the printout can also be stored in a print file using the selected printer driver, see "
Print to file " on page 552.
Remote command:
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]? on page 1084
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? on page 1084
SYSTem:COMMunicate:PRINter:SELect<device> on page 1084
Print to file
If a printer is selected as the Destination , use this option to store the data in a .prn
file using the selected printer driver.
Install Printer
This softkey opens the standard Windows dialog box to install a new printer. All print-
ers that are already installed are displayed.
Only user accounts with administrator rights can install a printer.
Creating Screenshots of Current Measurement Results and Settings

R&S FSV3030 Specifications

General

Brand	R&S
Model	FSV3030
Category	Measuring Instruments
Language	English