R&S SMW200A - Page 80

Trying Out the Instrument
R&S
®
SMW200A
80Getting Started 1412.9220.02 ─ 21
Figure 6-10: System Configuration in the Advanced Mode (1x2x2 configuration)
1 = Advanced mode, required for configuration of complex LxMxN MIMO scenarios
2 = Current signal routing; 2x2 MIMO configuration
3 = Separated and coupled baseband sources
4 = Simplified preview diagram of the particular configuration
2. Leave all further settings, i.e. the "I/Q Stream Mapper" settings, at their default
values and close the "System Configuration" dialog.
The block diagram displays the selected configuration.
Using the System Configuration Capabilities for MIMO Setups