Ratio Computers iX3M 2 Pro - DIVE SET 1 for RATIO Ix3 M 2 Pro and Ix3 M 2 Deep

28
DIVE SET 1 for RATIO iX3M 2 Pro and iX3M 2 Deep
To navigate the menu, follow the clues in the picture.
Algorithm: Select the decompressive algorithm you want to use for your dive.
BUL16C: Bühlmann ZHL-16 C (for iX3M2 Pro, Deep and Tech+)
BUL16B: Bühlmann ZHL-16 B (for iX3M2 Deep and Tech+)
BUL: Bühlmann ZHL-12 (for iX3M2 Deep and Tech+)
VPM: VPM-B (for iX3M2 Deep and Tech+)
Attention: if you have a RATIO iX3M 2 Tech+ go to the next page.
PS: The RATIO iX3M 2 Pro and iX3M 2 Deep conservatism can be changed
on pre-set levels from 0 to 5.
The levels matches with the following tables:
Helpful tip:
A higher conservatism will make the device makes its calculation in a more precautionary way .
Generally speaking, it is recommended to increase the conservatism if you feel an excessive tiredness after your
last dive.
A hyperbaric doctor can advice you on how to set the conservatism according to your clinic status.
Bühlmann Lv4 and Lv5 are usually suggested for tech dives, a proper training is required.
Bühlmann (Gradients)
GFL/GFH
0 = 93/93
1 = 90/90
2 = 80/80
3 = 75/75
4 = 50/85
5 = 45/80
minimum conservatism
max linear conservatism
minimum conservatism
max linear conservatism
VPM -B (Critical bubble radius)
0 = 0.5
1 = 0.55
2 = 0.6
3 = 0.7
4 = 0.8
5 = 0.9
For iX3M 2 Pro and iX3M 2 Deep
ba c D
eXit neXt eDit eDit
BACK NEXT << >>
DIVE SETTINGS 1
WATER:
DIVE MODE:
SALT
SCUBA
PS0: 0
ALGORITHM: BUL16C
DECO CTRL: OFF