Ratio Computers iX3M 2 Pro - Update Your Ix3 M 2

73
Update your iX3M 2
Is very important to keep your iX3M 2 always up-to-date.
Subscribe the “Update alerts” service for free following the instruction in the next page.
The iX3M 2 can be connected with the USB cable to a Pc or to a Mac in order to update the device.
To connect the iX3M 2 to a Windows PC, Mac, or Linux PC follow step-by-step the tutorial available here:
http://www.ratio-computers.com/support
Attention: During the update a new OS version will replace the old OS version.
After an update always:
- Check that your dive settings are the one you need for your next dive (mixes, algorithm settings etc.)
- Consider that you will need to calibrate the compass. (see page COMPASS of this manual)
- Consider that after an update the iX3M 2 can“Reset to Default” (see “RESET TO DEFAULT” of this manual)
- Consider to perform a complete recharge of your iX3M 2 (not mandatory but suggested)