31
DIVE SET 2
S. STOP TIME: It sets the Safety Stop’s time in minutes.
You can set the time from 0 to 9 minutes (if 0 the Safety Stop is omitted)
Helpful tip:
Diving agencies can recommend dierent times for the Safety Stop.
Ask your Instructor or your diving certification agency for the value they suggest.
SAFETY STOP DEPTH: It sets the Safety Stop’s depth.
You can set the Safety Stop’s depth between 3mt (10ft) and 9mt (30ft).
The Safety Stop is carried out 1mt (3ft) deeper, than the depth you have set .
(eg. if S.STOP DEPTH= 5 the stop is carried out from 5.9 metres)
> The Safety Stop is recommended only for dives deeper than 9mt (60ft).
> The Safety Stop timer is re-set if the depth of 9mt (60ft).is passed again.
> The Safety Stop is automatically omitted if one or more mandatory deco stops have to be
performed when the diver ascent to 10mt (30ft) depth. In case the diver has not to perform any
deco stop when he/she ascent to 10mt (30ft) the Safety Stop will be shown.
DEEP STOP: It selects if use the Deep Stops and which algorithm is to be used to
calculate the DEEP STOPS:
OFF: No Deep Stop
STD: Standard Method (half of the max. depth for 2,5 minutes)
PYLE: Pyle Method (ask your instructor for the Pyle Method)
LAST STOP: (1-10): The depth at which you want to carry out the last decompression
stop (if the dive is outside NDLs and requires decompression stops)
ba c D
eXit neXt eDit eDit
BACK NEXT << >>
DIVE SETTINGS 2
SAFETY STOP TIME:
SAFETY STOP DEPTH: 5m
DEEP STOP: OFF
LAST STOP: 3m
3:
To Next Page
Loading...