Ratio Computers iX3M 2 Pro - DIVE SET 1 for RATIO Ix3 M 2 Tech

29
DIVE SET 1 for RATIO iX3M 2 Tech+
To navigate this menu follow the clues in the picture on the left.
Algorithm: Select the decompressive algorithm you want to use for your dive.
BUL16C: Bühlmann ZHL-16 C (for iX3M2 Pro, Deep and Tech+)
BUL16B: Bühlmann ZHL-16 B (for iX3M2 Deep and Tech+)
BUL: Bühlmann ZHL-12 (for iX3M2 Deep and Tech+)
VPM: VPM-B (for iX3M2 Deep and Tech+)
If the chosen Algorithm is BUL / BUL16B / BUL16C:
GFL/GFH:
set the Gradient Factor Low (GFL) e Gradient Factor High (GFH).
Attention: The GFL can NEVER be higher than the GFH.
It is possible to set the GFH from 20% to 100% ( 20% < GFH < 100% )
It is possible to set the GFL from 20% to GFH ( 20% < GFL < GFH )
Helpful tip: You can keep the buttons C or D pressed to change the iX3M 2 data more rapidly.
ATTENTION: To change the Gradient Factor’s value a suitable theoretical
knowledge is needed.
DO NOT CHANGE THE GRADIENT FACTORS WITHOUT A SUITABLE TRAINING.
The RATIO iX3M 2 is not responsible for damages to people or objects due to a
wrong setting of such parameters.
For suggested protection levels refer to the previous page of this manual.
Helpful tip:
If you have any doubts on your device’s setting, you can set the company’s parameters from the menu DEFAULT
Helpful tip:
Generally speaking, reducing the GFH involves a computer increasing conservatism. The GFL’s reduction
involves a shift towards a major depth of the first compulsory decompressive stop.
Helpful tip:
With the RATIO iX3M 2 it is possible to change the value GFL/GFH while diving, to manage possible
emergencies.
For iX3M 2 Tech+
ba c D
neXt
eDit eDit
BACK NEXT << >>
DIVE SETTINGS 1
WATER:
DIVE MODE:
SALT
SCUBA
GFL/GFH: 93/93
ALGORITHM: BUL16C
DECO CTRL: OFF