43
NDL Planner
To navigate the menu follow the instructions in the picture on the left.
The RATIO iX3M2 integrates a complete planner for square dives for both BUL & VPM
Attention: To modify the dive parameters set the device as desired entering the
menu DIVE SET and the menu MIX
DEPTH: Set the dive’s maximum depth.
TIME: Set the desired bottom time.
Evaluate: it starts the simulation (wait until the word “processing” disappears)
If the dive is within the safety parameters:
NDL: Remaining non decompression time (after the time you have set).
CNS: % of accumulated CNS.
OTU: % of accumulated OTU.
MIX QTY: Mix value expressed in litres which is presumably needed for the
dive.
ATTENTION: The gas used quantity is purely approximate and referred to a standard use.
Take into consideration the information given by your diver certification agency to about the
quantity of gas to be used.
b
b
a
a
c D
eXit
eXit
neXt
bacK
eDit eDit
BACK NEXT PERFORM
OC PLANNER
TIME 10:
DEPTH: 18m
EVALUATE
OC PLANNER
TIME:10DEPTH: 18m
NDL: 37
CNS: 0%
OTU: 2
MIX QTY: 559L
To Next Page
Loading...