59
OC MIX MAX
50%
DEPTH RUNTIME NDL
PPO2
21
0.86
12
5
.2
m
:00
45
.2
m
OC MIX MAX
50%
DEPTH RUNTIME NDL
PPO2
21
0.86
12
5
.2
m
:00
45
.2
m
OC MIX MAX
50%
DEPTH RUNTIME NDL
PPO2
21
0.86
12
5
.2
m
:00
45
.2
m
OC MIX MAX
50%
DEPTH RUNTIME NDL
PPO2
21
0.86
12
5
.2
m
:00
45
.2
m
OC MIX MAX
50%
DEPTH RUNTIME NDL
PPO2
21
0.86
12
5
.2
m
:00
45
.2
m
OC MIX: Indicates the current dive mode (OC= Open Circuit or CCR = Closed
Circuit) and the Mix currently used (it blinks in red if a better mix is available for the
current depth).
PP02: O2 partial pressure of the active mix.
MAX: Maximum reached depth
GASES: (On surface only) The number of mixes that are set as active (ON)and will
be used in the next dive (as “GASES” is intended to be used to check how many mixes are active before the
dive, “GASES” is hid during the dive)
Press D button to display:
TEMP: Current water temperature
ASC: Ascent or descent speed expressed in mt/min (or ft/min)
Low alarm level: if the ascent speed is >8 mt/min (25ft/min)
Medium alarm level: if the ascent speed is >9 mt/min (30ft/min)
High alarm level:if the ascent speed is >10 mt/min (33ft/min)
AVG: Average dive’s depth
TIME: A resettable stopwatch (MINUTES + SECONDS) that you can operate using
C button (press C one time to start the stopwatch, press C again to reset the
stopwach, the stopwatch will automatically stop at the end of the dive)
GF (R0)(PS): Set conservatism (Gradients, Critical Bubble Radius or livels)
OTU: accumulated OTU
CNS: accumulated CNS
D
neXt
OC MIX
OC MIX
OC MIX
GF
50%
50%
50%
93/93
+16°
C
0.86
18
.7
m
15
0.00
0:00
45
.2
m
10
TEMP
PP02
AvG
OTU
ASC
TIMER
MAX
CNS
To Next Page
Loading...