Rational SelfCooking Center - Working with mobile oven racks, mobile plate racks and transport trolleys for table-top units (option)

Your SelfCooking Center
®
has a touch screen. You
can enter data on your SelfCooking Center
®
by just
touching it lightly with your finger.
Selecting a function
Examples:
Press button
Short bleep and flashing red light confirms button
has been pressed.
Active button is surrounded by flashing red frame.
The central dial can be used to enter data while the
button is flashing.
Confirmation of data input
takes place automatically after 4 seconds.
or
press (Push Function) on central dial
or
press any button.
Central dial
You can enter your desired values by rotating the
central dial.
Push Function
Entries can be confirmed by pressing the central
dial.
Unit too hot
If the cooking cabinet is hotter than the
temperature set, the button for the mode selected
will flash (e.g. Dry Heat).
(See "Cool Down" chapter for cooking cabinet
cooling).
Help Function
This will give you handy tips on everyday
use (see also Help Function chapter).
- 13 -
General User Instructions
Info