Rational SelfCooking Center - Copy program

Setting Program Lock:
New programs cannot be created when "Program
Lock" is set. You can use existing programs, but not
change, copy or delete them.
1
2
3
4
Enter password
Use central dial to dial desired letter or number
and press central dial to select.
Default password "12345”
Program lock active
Program lock inactive
Change password
1
2
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
3
4
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
5
6
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
ABCDEF G HIJKLM
repeat new password
ABCDEF G HIJKLM
enter new password
ABCDEF G HIJKLM
enter old password
_xxxx
change password
ABCDEF G HIJKLM
enter password
_xxxx
Prog
settings
- 41 -
Programming Mode "Program Lock"