Rational SelfCooking Center - CareControl - CleanJet+care cleaning

If your kitchen setup so requires, you can set your
unit to start automatically.
Enter automatic start time:
1
or
1
or
1
Select cooking mode in SelfCooking Control
®
mode,
manual mode or program and make the desired
settings (time, cabinet temperature, core tempera-
ture etc.).
2
3
Most recently set start time is automatically
displayed.
4
5
Set the desired start time using the central dial
and press the central dial to confirm.
6
7
Set the desired date using the central dial and
press the central dial to confirm.
The start time is activated.
After 10 seconds the display alternately
shows the real time and the start time. The cabinet
lighting is switched off.
Note:
Or you can put steps 2-7 before step 1.
Deactivating start time
Select function
Caution!
• We would remind you that it is very bad
food hygiene to keep food in an uncooled
or unheated cooking cabinet for a pro-
longed period!
start time
start time
02:00 (real Time)
06:00 start time
20.05.04
19.05.04
06:00 start time
17:00 start time
17:00 start time
start time
- 50 -
Automatic start time