Rational SelfCooking Center - Change program

With Level Control you can enter an individual time
for each of your appliance racks and have it
displayed. That way you can always see exactly
when each rack is ready. The buzzer sounds and the
indicated level flashes as soon as the preset time
for the relevant rack is up. Once the cabinet doors
have been opened and shut the level is free again
and can be reloaded.
Note
Please note that the products must always be
cooked with the same cooking parameters
(climate, cooking cabinet temperature, air speed,
etc.).
e.g. "Test" program
1
2
3
Enter desired program name.
Dial desired letter with central dial and press
central dial to select.
e.g. "Test" program
4
5
6
7
8
9
10
11
Program stored.
Or work with Preheat:
1
2
3
Rotate central dial to the left until "Preheat"
appears on the display.
4
5
6
160 °C
preheat
160 °C
END
0:33
160 °C
store
Test
ABCDEF G HIJKLM
LevelControl
- 39 -
Programming Mode "Level Control"