MySCC - Expert Settings
148 / 203
step info/button instructions
6 After preheating, load and cook as usual.
7
When prompted to unload, confirm the cooking
result (green check mark) and either save or
delete the entered cooking process (red cross).
Please note that only standardised products of the same type and identical output temperature
can be used for this function. The ideal cooking processes that are saved are always only
suitable for those sizes of models with which they were created. It is not possible to use these
cooking processes in an appliance of a different size to the original appliance.
If HACCP data should be documented, it is recommended to use them in the iCookingControl
without the recording mode.
Please note that it may be necessary to check the core temperature of the food before serving
depending on the local legal stipulations.
To Next Page
Loading...
